-
EXTRUSION 320
Extrusion LineINDUSTRIAL VACUUM CLEANERS FOR METAL & PVC CHIPS
The 320 vacuum cleaners of the Extrusion line are designed specifically for industrial purposes, this model is equipped with powerful motors and an advanced filtering system. Its vacuum characteristics and air flow rate make it ideal for the suction of chips or dust. The use of a cyclonic pre-filter captures more than 90% of the suctioned material before it reaches the main filter, thus preventing it from clogging and considerably extending its life. -
EXTRUSION 38
Extrusion LineINDUSTRIAL VACUUM CLEANERS FOR METAL & PVC CHIPS
The 38 vacuum cleaners of the Extrusion line are the most compact of the iVision range. They are used together with small single -head saws with low production of chips and dust, as they are ideal for the collection of light materials such as PVC, aluminum and other light alloys. The compact dimensions of the Extrusion 38 allow the operator to move with agility in confined spaces while maintaining an excellent quality standard in terms of suction and filtration efficiency efficiency. Thanks to the three-phase motors these vacuums cleaners can safely work continuously with minimal maintenance. -
FILTER FOR VACUUM CLEANER
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
The classification filters for vacuum cleaner and powders emissions into the environment, is assigned by the type of powders and the degree of danger to health. For its suction devices such classification is regulated by IEC 60335-2-69 worldwide. This classification provides several categories of powders, such as: • Category of powders L (low/moderate): fall into that category powders with MPC values (maximum permitted concentration in the work place) > 1 mg / m³Are retained at least 99% of particles aspirated.The disposal of the collected material must be made trying to raise a few powders. • Category of powders M (medium): fall into that category powders with MPC values (maximum permitted concentration in the work place) > 0.1 mg / m³ and wood powdersAre retained at least 99.9% of particles aspirated.The disposal of the collected material must be made trying to raise a few powders. • Category of powders H (high): fall into that category powders with MPC values (maximum permitted concentration in the work place) < 0.1 mg / m³, with carcinogenic and pathogenic powdersAre held at least 99.995% of particles aspirated.The disposal of the collected material must be done without raising powders. On each iVision vacuum cleaner is applied a label indicating the hazard class of the dust in the environment allowed. -
FLAT TABLE 100
Flat Table LineINDUSTRIAL VACUUM CLEANERS FOR CHIP ON CNC ROUTER
The industrial vacuum cleaners of the iVision FLAT TABLE 100 line are the best-selling models for use in the world of panel processing. Although compact in size, the FLAT TABLE 100 vacuum cleaners have a 100-liter tank to facilitate ease of use even in confined spaces. This means that they lend themselves to being mated to 3-axis milling machines that generate an important quantity of scraps and material to be vacuumed to guarantee a perfect end-product. -
FLAT TABLE 160
Flat Table LineINDUSTRIAL VACUUM CLEANERS FOR CHIP ON CNC ROUTER
The vacuum cleaners of the FLAT TABLE 160 line are the best performing models in the iVision range and are ideal for collecting chips in large CNC machines. Thanks to the powerful side channel blowers and the large chip collector (160lt), the FLAT TABLE 160 line vacuum cleaners are ideal for the maintenance and cleaning of large machining centers with high production of scraps, shavings and dust. The scraps generated by the cutters on 3-axis numerical control machines require industrial extraction of chips and dust as efficiently as possible, to ensure that the router works accurately and correctly. The integration of accessories specifically made for this sector, such as the innovative aerial arm, allows iVision to be able to provide the right product for each application. The use of highly technological components combined with meticulous care and attention to design characterize all iVision industrial vacuum cleaners. -
FLAT TABLE 320
Flat Table LineINDUSTRIAL VACUUM CLEANER FOR CHIP ON CNC ROUTER.
The FLAT TABLE 320 model is used in the world of machining with 3-axis CNC machines with high dust/chip production. Designed specifically for industrial purposes, this model is equipped with powerful motors and advanced performing filtration system. Its vacuum and airflow characteristics make it ideal for heavy dust extraction. The use of a pre-filter-cyclone enables it to capture more than 90% of the sucked material before it reaches the main filter, thus preventing clogging and greatly extending its service life. -
FLAT TABLE 38
Flat Table LineINDUSTRIAL VACUUM CLEANERS FOR CHIP ON CNC ROUTER
The vacuum cleaners of the FLAT TABLE 38 line are the most compact and practical models among the iVision range. These are industrial vacuum cleaners with side channel blowers, used for the collection of chips in small CNC machines. The waste generated by the 3-axis milling machines requires very efficient industrial extraction of chips in order to guarantee absolute cleanliness. The compact dimensions allow the operator to move with agility in confined spaces and the excellent performance of the side channel blowers is thus fully exploited. -
FREQUENCY INVERTER
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
Compact technology, powerful and built-to-last this characterizes the frequency inverter that regulates and manages the performance of iVision vacuums. The inverter operates the normal work of the turbines or intervenes instantaneously in all of the possible emergencies that may occur by increasing or decreasing the RPM of the engines in order to ensure the same performance for the system even in the case that a machine that the vacuum is attached to stops working. -
GATE CLOSURE
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
The gate valves that enable the closure of multiple vents allow the operator to choose to work with one, two or more hoses simultaneously. These gates can be operated manually by operators, handled automatically by machines, or remotely via foot pedal. -
HEPA FILTER
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
HEPA is the acronym used for the definition “High Efficiency Particulate Air”. It ‘a kind of filter for vacuum cleaner with a particular system of filtering with high efficiency for fluid, liquid or gas. It has the ability to trap a very high amount of particles of very small size, ability that other filters for vacuum cleaners do not have. Indeed, there are different categories of filters (L / M / H), and different categories of HEPA filters, that has made according to the material more efficient to inhale. The HEPA filter is composed from microfiber filter sheets (generally borosilicate) assembled in multiple layers, and separated by aluminum septa. The microfiber filter sheets have the task to block the polluting solid particles (or particulate). The solid particles are very small and can be harmful to health or may affect the quality of the final product to be obtained. HEPA filters are part of the category of the “absolute filters”, justified by the fact that these filters have a high efficiency of filterign. In particular, HEPA filters introduce an efficiency of filtering between 85% (H10) and 99.995% (H14). The filtration efficiency of particles of 0.3 µm, is regulated by the UNI EN 1822. -
LIFT KIT
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
The lifting device is used for emptying the 100 Lt (iV2 model) or the 160 Lt (iV3 model) chip container with the use of a forklift. The operators do not have to make any effort for the emptying process. At the sides of the collecting containers there are two hooks for the lifting kit to be connected to, which in turn is lifted from the truck by a chain. -
OIL MIST 600
Oil MistINDUSTRIAL VACUUM CLEANERS FOR OIL MIST
Designed for the suction and purification of air from oily mists and fumes, the OIL MIST 600 model is ideal for connecting to machines for the processing of small components. This model is intended for use with work stations, lathes and machine tools with an internal volume > 1 m3 and with lathing machines with oil injectors < 20 mm. The main cartridge filter, made of glass microfibre together with the microfibre prefilter inside a metal cell, guarantees filtration with an efficiency of 99%.