WOOD 360
WOOD 360
INDUSTRIAL VACUUM CLEANER FOR WOOD AND PVC CHIPS
The 360 industrial vacuum cleaners of the WOOD line are mainly used to collect and capture large amount of dust, wood shavings and PVC shavings and are associated to be combined with circular saws, thickness planers, grinders or calibrators, cutters and analog disconnectors.Due to the conformation of the aspirator the high performance of the centrifugal fans are fully exploited the results of extremely efficient aspiration.Thanks to the maximum flow values reached by these vacuum cleaners it is possible to use them on machines with a very large suction diameter (200mm +).Use of puncture resistant PVC bags facilitates the collection of chips and all materials extracted.
STANDARD BASIC SUPPLY
- High flow centrifugal fans up to 4300 m³ / h
- Non-marking swivel wheels with parking brake
- M class polyester bag filter (stops 99.9% of the sucked particles)
- PVC Collection Bags 360 liters
- Use and maintenance manual
- C.E. certification
- Motor overload protector
- Electric cable 8 mt
-
CLEANING KIT Ø 50 mm
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
The cleaning kit is usable on all of the series and consists of a robust, anti-abrasion tube that ends at the extremities with special zinc-plated steel accessories capable of transporting, without any obstacle, chippings and oil from the machine tool to the vacuum collection tank. The suction tube comes housed inside a support in order to facilitate the movement of the vacuum in the workshop without being an obstable for the operator, it allows the avoidance of leakage of oil during the maneuvers of the vacuum. -
SPECIAL KIT FOR FLOOR CLEANING
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
For floor cleaning, iVision has developed a specific kit with a fixed brush positioned on the front part of the vacuum with a handle for manuevering. -
ANTISTATIC KIT
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
To be applied to all models of industrial vacuums in production. This kit allows you to unload electrostatic charges accumulated during the collection phase, avoiding transferring them to other machinery or operators. It’s particularly recommended during the working of aluminum, considering the chips of this material can create a potentially explosive atmosphere inside of the tank. -
AUTOMATIC CLEANING WITH SHAKING
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
Filter cleaning with a pneumatic piston requires being connected to an air adapter from 6-8 bar and via a pressure regulator that can vary the intensity of the sliding of the piston. • To effectively clean the filters mounted inside the vacuum, the vertical piston filter cleaning system was developed. Through a manual selector (semiautomatic solution) or by a timer (automatic version) a pneumatic piston acts from the bottom of the filter, shaking it intensely in a way that ensures that the chips or the dust transferred to the outside of the filter fall into the collection tank, permitting in this way the continued optimal functioning of the filter. • Vertical piston cleaning of the filter is recommended for any type of application, as it significantly improves the cleaning of the filter compared to the vibrating motor standard version. • Vertical piston cleaning of the filter, especially in its automatic version, becomes mandatory in the suctioning of fine dust that can clog the filter rapidly. In the case of large and heavy chips, this system is not mandatory, but for light or volatile material, yes! • The principal advantage of this system comes from the greater efficiency in the incisiveness of the shaking of the filter with a piston. Another advantage is the use of this system in its automatic version, shaking the filter every time that the motor is turned off, eliminating the typical problem of the reliability of the operator, who usually has to remember to turn on the cleaning of the filter. -
CHIPS SEPARATOR
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
Metallic mesh chips separator from lubrication. This optional accessory allows you to perfectly separate aspirated solid materials from liquid, to facilitate their storage and/or disposal. The chip separator holds the solid material allowing the liquid to deposit to the bottom of the collection tank. -
REMOTE START & STOP
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
The kit allows the automatic switching on and off of the vacuum cleaner simultaneously with the machine tool when they are connected. This can occur in three different ways: a) The vacuum gets switched on by contact without electricity "potential free contact". b) The vacuum gets switched on with a 24V contact. c) The vacuum gets switched on with a 230V contact.
WOOD 165
Wood LineINDUSTRIAL VACUUM CLEANER FOR WOOD AND PVC CHIPS
The 165 industrial vacuum cleaners WOOD line are mainly used to collect and capture large volumes of dust, wood shavings and PVC chips. They are designed to be combined with circular saws, thickness planers, grinders or graders, cutters and vertical panel saws. Their filter surface area is high and they are equipped with M-class bag filters. In addition, the compressed air filter cleaning system makes it easy to clean the filters whenever necessary, facilitating regular maintenance. WOOD 165 vacuum cleaners are also equipped with a separator unit to protect the filter area and optimise the storage of the sucked material in the collection containers, which are characterised by their large tank capacity.
WOOD 180
Wood LineINDUSTRIAL VACUUM CLEANER FOR WOOD AND PVC CHIPS
The 180 industrial vacuum cleaners of the WOOD line are mainly selected to collect and capture dust, wood shavings and PVC shavings and are associated to be combined with circular saws, thickness planers, grinders or calibrators, cutters and analog disconnectors.Due to the conformation of the aspirator the high performance of the centrifugal fans are fully exploited the results of extremely efficient aspiration.Thanks to the maximum flow values reached by these vacuum cleaners it is possible to use them on machines with a very large suction diameter (200mm +).Use of puncture resistant PVC bags facilitates the collection of chips and all materials extracted.
WOOD CUSTOM
Wood LineINDUSTRIAL VACUUM CLEANER FOR WOOD AND PVC CHIPS
The CUSTOM model is dedicated to intensive and continuous machining on automatic cutting centres with high chip production. Thanks to the discharge system with rotary valve it is used in all working environments where, due to production requirements, suction is required 24/7. The vacuum cleaners can be supplied with different accessories to make work easier in large manufacturing companies. Each model has been designed, developed and assembled to meet the specific requirements of each customer, focusing above all on the realisation of a product able to work side by side with each customer's machine tools. The careful study of details, the attention dedicated to design, the use of strong materials and the production of a simple but high-performance model are the features of a product entirely developed and manufactured in Italy.