FLAT TABLE 38
FLAT TABLE 38
INDUSTRIAL VACUUM CLEANERS FOR CHIP ON CNC ROUTER
The vacuum cleaners of the FLAT TABLE 38 line are the most compact and practical models among the iVision range.
These are industrial vacuum cleaners with side channel blowers, used for the collection of chips in small CNC machines. The waste generated by the 3-axis milling machines requires very efficient industrial extraction of chips in order to guarantee absolute cleanliness.
The compact dimensions allow the operator to move with agility in confined spaces and the excellent performance of the side channel blowers is thus fully exploited.
STANDARD BASIC SUPPLY
- Side channel blower (power from 2.2Kw to 4Kw)
- Completely steel structure
- Non-marking swivel wheels with parking brake
- M class polyester bag filter (stops 99.9% of the sucked particles)
- Detachable container with wheels
- Container capacity 38 liters
- External exhaust with silencer
- Pneumatic filter shaker
- Use and maintenance manual
- C.E. certification
- Motor overload protector
- Electric cable 8 mt
The vacuum cleaner can also be supplied with ATEX-Zone 22 certifcation for explosive atmospheres. More info
-
CLEANING KIT Ø 50 mm
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
The cleaning kit is usable on all of the series and consists of a robust, anti-abrasion tube that ends at the extremities with special zinc-plated steel accessories capable of transporting, without any obstacle, chippings and oil from the machine tool to the vacuum collection tank. The suction tube comes housed inside a support in order to facilitate the movement of the vacuum in the workshop without being an obstable for the operator, it allows the avoidance of leakage of oil during the maneuvers of the vacuum. -
ANTISTATIC KIT
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
To be applied to all models of industrial vacuums in production. This kit allows you to unload electrostatic charges accumulated during the collection phase, avoiding transferring them to other machinery or operators. It’s particularly recommended during the working of aluminum, considering the chips of this material can create a potentially explosive atmosphere inside of the tank. -
AUTOMATIC CLEANING WITH SHAKING
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
Filter cleaning with a pneumatic piston requires being connected to an air adapter from 6-8 bar and via a pressure regulator that can vary the intensity of the sliding of the piston. • To effectively clean the filters mounted inside the vacuum, the vertical piston filter cleaning system was developed. Through a manual selector (semiautomatic solution) or by a timer (automatic version) a pneumatic piston acts from the bottom of the filter, shaking it intensely in a way that ensures that the chips or the dust transferred to the outside of the filter fall into the collection tank, permitting in this way the continued optimal functioning of the filter. • Vertical piston cleaning of the filter is recommended for any type of application, as it significantly improves the cleaning of the filter compared to the vibrating motor standard version. • Vertical piston cleaning of the filter, especially in its automatic version, becomes mandatory in the suctioning of fine dust that can clog the filter rapidly. In the case of large and heavy chips, this system is not mandatory, but for light or volatile material, yes! • The principal advantage of this system comes from the greater efficiency in the incisiveness of the shaking of the filter with a piston. Another advantage is the use of this system in its automatic version, shaking the filter every time that the motor is turned off, eliminating the typical problem of the reliability of the operator, who usually has to remember to turn on the cleaning of the filter. -
REMOTE START & STOP
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
The kit allows the automatic switching on and off of the vacuum cleaner simultaneously with the machine tool when they are connected. This can occur in three different ways: a) The vacuum gets switched on by contact without electricity "potential free contact". b) The vacuum gets switched on with a 24V contact. c) The vacuum gets switched on with a 230V contact. -
GATE CLOSURE
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
The gate valves that enable the closure of multiple vents allow the operator to choose to work with one, two or more hoses simultaneously. These gates can be operated manually by operators, handled automatically by machines, or remotely via foot pedal. -
AERIAL ARM
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
The aerial arm is highly recommended for every CNC router. The use of this system reduces the risk of accidents due to obstruction of the tube on the sides of the machine.
FLAT TABLE 320
Flat Table LineINDUSTRIAL VACUUM CLEANER FOR CHIP ON CNC ROUTER.
The FLAT TABLE 320 model is used in the world of machining with 3-axis CNC machines with high dust/chip production. Designed specifically for industrial purposes, this model is equipped with powerful motors and advanced performing filtration system. Its vacuum and airflow characteristics make it ideal for heavy dust extraction. The use of a pre-filter-cyclone enables it to capture more than 90% of the sucked material before it reaches the main filter, thus preventing clogging and greatly extending its service life.
FLAT TABLE 100
Flat Table LineINDUSTRIAL VACUUM CLEANERS FOR CHIP ON CNC ROUTER
The industrial vacuum cleaners of the iVision FLAT TABLE 100 line are the best-selling models for use in the world of panel processing. Although compact in size, the FLAT TABLE 100 vacuum cleaners have a 100-liter tank to facilitate ease of use even in confined spaces. This means that they lend themselves to being mated to 3-axis milling machines that generate an important quantity of scraps and material to be vacuumed to guarantee a perfect end-product.