The vacuum cleaner is equipped with a touch screen unit on the front. It allows the operator to quickly and easily monitor the level of contamination of the filter. Thanks to such a device, the operator is able to recognize in real time the filter condition and the efficiency of the whole vacuum cleaner. Afterwards, the operator can choose to clean the filter (in manual or automatic mode) and also manage the remote Start&Stop control option.
Once the filter is completely clogged, the unit will automatically warn the operator of the need to replace the filter utilizing: • A visual signal
On the round screen you can find the following icons:
Scale-LED: it shows the level of contamination that the filter has reached. The measurement is made in a scientific and non-empirical manner through a sophisticated system of sensors controlled by a PLC exclusively for this purpose.
1) Manual ON/OFF: if you select this icon – it allows you to simply start the vacuum system with the simple touch of your finger.
2) Automatic ON/OFF: if you select this icon – the motor is switched on / off directly from the machine.
3) Automatic Filter Cleaning: if you select this icon – an electric contact enables the cleaning of the filter in a completely automatic and programmed manner.
4) Semiautomatic Filter Cleaning: if you select this icon – it is used to clean the filter immediately.
Every model has been created, produced and assembled to meet every specific request, producing, above all, the creation of a product capable of working side by side of the machine tool of every client.
Compact technology, powerful and built-to-last this characterizes the frequency inverter that regulates and manages the performance of iVision vacuums. The inverter operates the normal work of the turbines or intervenes instantaneously in all of the possible emergencies that may occur by increasing or decreasing the RPM of the engines in order to ensure the same performance for the system even in the case that a machine that the vacuum is attached to stops working.
The cleaning kit, usable through the IV3 series, consists of a robust, anti-abrasion tube that ends at the extremities with special zinc-plated steel accessories capable of transporting, without any obstacle, chippings and oil from the machine tool to the vacuum collection tank. The suction tube comes housed inside a support in order to facilitate the movement of the vacuum in the workshop without being an obstable for the operator, it allows the avoidance of leakage of oil during the maneuvers of the vacuum.