TOUCH SCREEN
IVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
The vacuum cleaner is equipped with a touch screen unit on the front. It allows the operator to quickly and easily monitor the level of contamination of the filter.
Thanks to such a device, the operator is able to recognize in real time the filter condition and the efficiency of the whole vacuum cleaner. Afterwards, the operator can choose to clean the filter (in manual or automatic mode) and also manage the remote Start&Stop control option.
Once the filter is completely clogged, the unit will automatically warn the operator of the need to replace the filter utilizing:
• An audible signal.
• A visual signal.
Try the iVision Touch Screen,
choose the best!
HUMAN MACHINE INTERFACE
On the round screen you can find the following icons:
Scale-LED: it shows the level of contamination that the filter has reached. The measurement is made in a scientific and non-empirical manner through a sophisticated system of sensors controlled by a PLC exclusively for this purpose.
1) Manual ON/OFF: if you select this icon – it allows you to simply start the vacuum system with the simple touch of your finger.
2) Automatic ON/OFF: if you select this icon – the motor is switched on / off directly from the machine.
3) Automatic Filter Cleaning: if you select this icon – an electric contact enables the cleaning of the filter in a completely automatic and programmed manner.
4) Semiautomatic Filter Cleaning: if you select this icon – it is used to clean the filter immediately.
Every model has been created, produced and assembled to meet every specific request, producing, above all, the creation of a product capable of working side by side of the machine tool of every client.
CYCLONIC PREFILTER
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
Strongly recommended whenever possible, the pre-filter is positioned between the vacuum and the chip-generating machine, as the first point of collection of the collected material. It is specially used to preserve the life of the filter inside the vacuum unit. It retains most of the collected material and can have a cone or cylindric shape and serves as a mechanical filter. Through a tangential entry the collected material is centrifuged into its interior until its speed gradually decreases and the material gradually falls to the bottom of the collecting unit due to the force of gravity. Such a process ensures that only a relatively low percentage of collected dust or chips manages to actually reach the real filter positioned in the upper part of the vacuum cleaner. The cyclonic pre-filter can be combined with a: • 160 L tank • 500 L tank • 1000 L tank The cyclonic pre-filter becomes almost mandatory for fine or very fine powders, which are very likely to clog the filter quickly, compromising the smooth operation of the entire system, but are only recommended for large, heavy chips. The main advantage of the cyclonic pre-filter is to protect the filter of the vacuum cleaner from quickly clogging, thus extending its life before replacement and significantly reducing the maintenance of the entire system.
ANTISTATIC KIT
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
To be applied to all models of industrial vacuums in production. This kit allows you to unload electrostatic charges accumulated during the collection phase, avoiding transferring them to other machinery or operators. It’s particularly recommended during the working of aluminum, considering the chips of this material can create a potentially explosive atmosphere inside of the tank.
CHIP SEPARATOR TANK FOR SANDBLASTING CONTAINER
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
This is a sieve made of a perforated sheet that allows, during suction, to retain the residue generated during blasting oprations and in general dirt. It has two comfortable handles the permit the removal of the container and the repositioning after having emptying the container.