iV CUSTOM SHOES
INDUSTRIAL VACUUM CLEANER FOR DUST OF LEATHER & FABRICS
The iV Custom vacuum cleaners of the Shoes line are born from a long experience in the footwear sector, to give innovative and technological answers to the growing suction needs of shavings and dust generated during the processing of footwear.
Each vacuum cleaner is made according to the technical specifications indicated by our customers to guarantee maximum suction efficiency. The nebulization system installed will drastically reduce the fire hazards caused by the sparks generated during processing.
Thanks to the innovations applied on the vacuum cleaners of the iV Custom Shoes line, the ordinary and extra-ordinary maintenance of your machine tools will be faster, simpler and cheaper.
- Semiautomatic and automatic filter cleaning
- Touch screen in order to easily recognize the level of contamination of the filter
- Pneumatic gate closure with a pedal in order to work simultaneously with more than one machine
- Cyclonic pre-filter for the pre-separation of materials that allows the elongation of the main filter life
- Cyclonic prefilter for the preseparation of material that allows the life the main filter to be extended
- Possibility of remote control
- Rotating valve
- Ample range of accessories dedicated to every need of this sector
You can also have iVision vacuums with ATEX-Zone 22 certifcation for potentially explosive environments. More info
HI-TECH VACUUMThe kit allows the automatic switching on and off of the vacuum cleaner simultaneously with the machine tool when they are connected. This can occur in three different ways: a) The vacuum gets switched on by contact without electricity "potential free contact". b) The vacuum gets switched on with a 24V contact. c) The vacuum gets switched on with a 230V contact.
HI-TECH VACUUMThe gate valves that enable the closure of multiple vents allow the operator to choose to work with one, two or more hoses simultaneously. These gates can be operated manually by operators, handled automatically by machines, or remotely via foot pedal.
HI-TECH VACUUMStrongly recommended whenever possible, the pre-filter is positioned between the vacuum and the chip-generating machine, as the first point of collection of the collected material. It is specially used to preserve the life of the filter inside the vacuum unit. It retains most of the collected material and can have a cone or cylindric shape and serves as a mechanical filter. Through a tangential entry the collected material is centrifuged into its interior until its speed gradually decreases and the material gradually falls to the bottom of the collecting unit due to the force of gravity. Such a process ensures that only a relatively low percentage of collected dust or chips manages to actually reach the real filter positioned in the upper part of the vacuum cleaner. The cyclonic pre-filter can be combined with a: • 160 L tank • 500 L tank • 1000 L tank The cyclonic pre-filter becomes almost mandatory for fine or very fine powders, which are very likely to clog the filter quickly, compromising the smooth operation of the entire system, but are only recommended for large, heavy chips. The main advantage of the cyclonic pre-filter is to protect the filter of the vacuum cleaner from quickly clogging, thus extending its life before replacement and significantly reducing the maintenance of the entire system.
HI-TECH VACUUMThe vacuum cleaner is equipped with a touch screen unit on the front. It allows the operator to quickly and easily monitor the level of contamination of the filter. Thanks to such a device, the operator is able to recognize in real time the filter condition and the efficiency of the whole vacuum cleaner. Afterwards, the operator can choose to clean the filter (in manual or automatic mode) and also manage the remote Start&Stop control option. Once the filter is completely clogged, the unit will automatically warn the operator of the need to replace the filter utilizing: • A visual signal