PCB CUSTOM
INDUSTRIAL VACUUM CLEANER FOR FIBERGLASS AND ALUMINIUM
The vacuum cleaners of the PCB line are dedicated to machines for the production of printed circuits such as drilling, milling or contouring machines, which require accurate and efficient extraction of chips/dust.
The CUSTOM model features a continuous discharging system with rotary valve that discharges the material directly into bigbags.
The detection sensors and the sound and visual alarm system are designed to provide the operator with the maximum support.
The separate 4-independent cartridge cleaning system allows maximum efficiency at all times. iVision© HMI system allows full control of the system and its efficiency, easily and intuitively.
Category: PCB Line
OPTIONAL
- Antistatic kit
- Start & stop
- Frequency inverter
-
CYCLONIC PREFILTER
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
Strongly recommended whenever possible, the pre-filter is positioned between the vacuum and the chip-generating machine, as the first point of collection of the collected material. It is specially used to preserve the life of the filter inside the vacuum unit. It retains most of the collected material and can have a cone or cylindric shape and serves as a mechanical filter. Through a tangential entry the collected material is centrifuged into its interior until its speed gradually decreases and the material gradually falls to the bottom of the collecting unit due to the force of gravity. Such a process ensures that only a relatively low percentage of collected dust or chips manages to actually reach the real filter positioned in the upper part of the vacuum cleaner. The cyclonic pre-filter can be combined with a: • 160 L tank • 500 L tank • 1000 L tank The cyclonic pre-filter becomes almost mandatory for fine or very fine powders, which are very likely to clog the filter quickly, compromising the smooth operation of the entire system, but are only recommended for large, heavy chips. The main advantage of the cyclonic pre-filter is to protect the filter of the vacuum cleaner from quickly clogging, thus extending its life before replacement and significantly reducing the maintenance of the entire system. -
TOUCH SCREEN
AccessoriesIVISION INDUSTRIAL VACUUM CLEANER ACCESSORIES
The vacuum cleaner is equipped with a touch screen unit on the front. It allows the operator to quickly and easily monitor the level of contamination of the filter. Thanks to such a device, the operator is able to recognize in real time the filter condition and the efficiency of the whole vacuum cleaner. Afterwards, the operator can choose to clean the filter (in manual or automatic mode) and also manage the remote Start&Stop control option. Once the filter is completely clogged, the unit will automatically warn the operator of the need to replace the filter utilizing: • An audible signal. • A visual signal.