FREQUENCY INVERTER
FREQUENCY INVERTER
HI-TECH VACUUM
Compact technology, powerful and built-to-last this characterizes the frequency inverter that regulates and manages the performance of iVision vacuums. The inverter operates the normal work of the turbines or intervenes instantaneously in all of the possible emergencies that may occur by increasing or decreasing the RPM of the engines in order to ensure the same performance for the system even in the case that a machine that the vacuum is attached to stops working.
ADVANTAGES
- For example, in the case that a turbine breaks or the filter clogs, the suction power is reduced and in that moment the sensors enable the inverter to increase the engine speed in order to compensate for the loss in power. All this prevents the need for production to stop or potential damage to the machines especially in cases where the vacuums are attached to more than one machine in a factory.
- In addition to ensuring the highest performance of the factory, it’s able to optimize the consumption of power by monitoring the number of machines working. For example, in the case of a factory with machine tools with only some working and others that are not, the inverter can adjust the consumption of electricity of the entire system to the minimum amount necessary.
- It features an incomparable reliability and ease of use that can be programmed to perform even the most complex operations. Additionally, it is designed so that air ventilation is not in contact with the electronics.
CHIP SEPARATOR TANK FOR SANDBLASTING CONTAINER
AccessoriesHI-TECH VACUUM
This is a sieve made of a perforated sheet that allows, during suction, to retain the residue generated during blasting oprations and in general dirt. It has two comfortable handles the permit the removal of the container and the repositioning after having emptying the container.
AERIAL ARM
AccessoriesHI-TECH VACUUM
The aerial arm is highly recommended for every CNC router. The use of this system reduces the risk of accidents due to obstruction of the tube on the sides of the machine.
FILTER
AccessoriesHI-TECH VACUUM
The classification filters for vacuum cleaner and powders emissions into the environment, is assigned by the type of powders and the degree of danger to health. For its suction devices such classification is regulated by IEC 60335-2-69 worldwide. This classification provides several categories of powders, such as: • Category of powders L (low/moderate): fall into that category powders with MPC values (maximum permitted concentration in the work place) > 1 mg / m³Are retained at least 99% of particles aspirated.The disposal of the collected material must be made trying to raise a few powders. • Category of powders M (medium): fall into that category powders with MPC values (maximum permitted concentration in the work place) > 0.1 mg / m³ and wood powdersAre retained at least 99.9% of particles aspirated.The disposal of the collected material must be made trying to raise a few powders. • Category of powders H (high): fall into that category powders with MPC values (maximum permitted concentration in the work place) < 0.1 mg / m³, with carcinogenic and pathogenic powdersAre held at least 99.995% of particles aspirated.The disposal of the collected material must be done without raising powders. On each iVision vacuum cleaner is applied a label indicating the hazard class of the dust in the environment allowed.